A food truck fire suppression system is an automatic fire extinguishing system built into the exhaust hood over your cooking line. If a grease fire starts, it discharges a wet chemical agent over the appliances, and it should shut off the fuel or power to the cooking equipment at the same time. Most fire codes require one on any food truck that cooks with grease-producing equipment such as fryers, griddles and charbroilers, and fire departments usually inspect it before they sign off your permit.
Key facts
- Cooking that produces grease-laden vapors usually needs a Type I hood with an automatic fire suppression system.
- The standards behind the rules are NFPA 96 (which has a section on mobile and temporary cooking), NFPA 17A for wet chemical systems, and your local fire code.
- Many fire departments require servicing by a licensed contractor every six months, with a current tag.
- A Class K extinguisher is expected near the fryers, plus a general-purpose extinguisher.
- Rules are set locally, so get your fire marshal’s checklist before you build or buy.
When does a food truck need a fire suppression system?
The trigger in most fire codes is grease. If your equipment produces grease-laden vapors, such as fryers, flat-top griddles, charbroilers or woks, expect to need an exhaust hood with an automatic extinguishing system. Nassau County, New York, for example, lists in its food truck bulletin that cooking equipment producing grease-laden vapors must have an exhaust hood, must be protected by an automatic fire extinguishing system, and that actuation must automatically shut down the fuel or electrical supply to the cooking equipment.
A truck that only reheats prepared food, makes coffee or serves cold items may not need one, but that is the fire marshal’s call, not yours. Ask before you choose your equipment.
How does a hood fire suppression system work?
- Detection. Fusible links or detectors in the hood and duct react to the heat of a fire.
- Discharge. The system releases a wet chemical agent through nozzles aimed at each appliance, the hood plenum and the duct.
- Fuel shut-off. A gas valve or electrical shunt cuts the energy to the cooking equipment so the fire is not re-fed.
- Manual pull station. A pull handle lets staff trigger the system by hand. It should be easy to reach on your way out.
The wet chemical reacts with hot cooking oil to form a soapy layer that smothers the fire and helps stop it reigniting. Water should never be used on a grease fire.
Which standards apply?
- NFPA 96 covers ventilation control and fire protection of commercial cooking operations, and includes provisions for mobile and temporary cooking.
- NFPA 17A covers wet chemical extinguishing systems.
- UL 300 is the fire test standard that modern kitchen suppression systems are listed to.
- Your local fire code, often based on the International Fire Code, sets how these apply to you.
The National Fire Protection Association has a plain-language page on food truck safety covering fire prevention, suppression and propane.
How often does the system need servicing?
Many fire departments require a licensed contractor to inspect and service the system every six months. Albuquerque Fire Rescue’s mobile vendor requirements, for instance, call for service and inspection every six months and ask vendors to bring a current maintenance report to inspection. After servicing, the contractor tags the system with the date.
You should also clean hood filters regularly and have the hood and ducts cleaned as grease builds up. A greasy duct is fuel waiting for a spark.
What fire extinguishers does a food truck need?
| Extinguisher | What it is for | Where it usually goes |
|---|---|---|
| Class K | Cooking oil and fat fires, used after the suppression system has discharged | Near the fryers and griddle |
| Multi-purpose (ABC) | Ordinary materials, flammable liquids and electrical fires | Visible, near an exit |
| Extra unit for generators | Required by some departments if you run a generator | Near the generator |
Exact ratings are set locally. Extinguishers generally need an annual service and a current tag, and staff should know which one to grab for which fire.
What do fire inspectors check on a food truck?
- Current service tag on the suppression system and extinguishers.
- All cooking appliances sitting fully under the hood.
- Nozzles in place and aimed at the right appliances.
- A working manual pull station and fuel shut-off.
- Clean filters and hood.
- Propane cylinders secured, with approved hoses and fittings, plus any required gas or carbon monoxide alarms.
- Spacing between fryers and open flames, which some codes require a steel baffle for.
Our food truck permits checklist covers the health and business permits that sit alongside the fire inspection.
Buying a used truck? Check the system first
A used truck may come with a hood system that is out of date, has been moved around or does not match the appliances you plan to use. Ask for the last service report, check the tag date and have a licensed contractor look at it before you buy. Changing appliances often means re-engineering the nozzles. If your insurer asks about fire protection, keep the paperwork handy; our guide to food business insurance types explains the main policies.
Frequently asked questions
Do all food trucks need a fire suppression system?
Not all. The usual trigger is cooking that produces grease-laden vapors. Your local fire marshal decides, so ask before you build or buy.
How often should a food truck fire suppression system be inspected?
Many fire departments require a licensed contractor to inspect it every six months. Check your local rule and keep the service tag current.
Can I install a food truck fire suppression system myself?
Generally no. Systems must be installed and serviced by trained, licensed technicians following the manufacturer’s listing and local code.
What should staff do if the system goes off?
Get everyone out, call the fire department and do not restart cooking until the system has been serviced and reset by a technician.
Do I need a Class K extinguisher if I have a hood system?
Usually yes. Fire codes commonly require a Class K extinguisher where cooking oils and fats are used, as a backup to the fixed system.
Summary
If your truck cooks with grease, plan for a Type I hood with an automatic fire suppression system, a Class K extinguisher, six-monthly servicing and a fire inspection before you open. Get your fire marshal’s checklist first and build to it. More in our food truck guides, including running a food truck in winter.
Featured photo: Mack House (kitchen of the food truck) by E4024, CC BY-SA 4.0, via Wikimedia Commons.
